Greetings Dave:> In response to Ben's query on Zone Alarm I have the following set in the
> firewall tab, this is using the free version on ZA.
>
> FS PC 'Trusted' Zone (This is my second PC on my LAN)
> Realtek adaptor 'Trusted' Zone (This is the LAN NIC on the 'server' PC)
> ICS share adaptor is on the Internet Zone
>
> I have trusted and Internet zones set to medium security. I think the
> trusted zone needs medium security for ACARS to work, but I may be
> wrong.
You know, I think you're right. I was never able to get ZA to work with anything while using the High setting. I also needed to make sure that the Automatic Lock was disabled.
> I am also not sure if removing ZA from the start-up section fully stops
> it working. There are two modules to ZA; ZA itself and a 'True Vector
> Service' which I think does the monitoring bit of za.
>
> I would make sure neither of those are running.
Then again, it's easy enough to uninstall and reinstall again. I think that's what I resorted to when troubleshooting another issue.
Thanks!
Ben
-= VPC OffLine Reader 2.1 =-
Registered to: Ben Chiu
-OLR.PL v1.80-
Printer-friendly
version of this topic
Bookmark this topic
(Registered users only)
VPC Tech
![[Admin]](http://www.flightadventures.com/Forum/htdocs/dcforum/Images/4bar.gif)
![[Crew]](http://www.flightadventures.com/Forum/htdocs/dcforum/Images/1bar.gif)
![[Sysop]](http://www.flightadventures.com/Forum/htdocs/dcforum/Images/3bar.gif)
![[Guest]](http://www.flightadventures.com/Forum/htdocs/dcforum/Images/key-s.gif)