Hi Vic,> I can't recall where I read it but altho the 2/3 ratio is correct
Seems to be exactly 70% rather than 66.666..% in my tests.
> there
> is a caveat. If you set your max FR to unlimited and later change it to
> something lower, the 2/3 ratio is not set and must be adjusted manually.
>
> In any event, it makes sense to double check it.
I think the article I referenced says the point is you might be better off adjusting the two separately anyway. It wasn't a matter of checking it, but not using the slider -- just changing the values in the CFG file.
Regards,
Pete
-= VPC OffLine Reader Version 1.1.3.1 =-
Registered to: Peter L. Dowson
-OLR.PL v1.76-