Printer-friendly version of this topic Bookmark this topic (Registered users only)	Previous Topic | Next Topic
VPC Forums FSFORUM

Current Message

James Certificates/Ratings/Crew Stations: 2. "RE: Hub Collisions" 06-25-02, 21:10z  Hi Bill, Welcome back my friend As Andrew said, check the cable connections etc. Also check that within the card properties they are both set the same. If they are set to Auto then try them in 100 Full Duplex. Come down in stages till it's working OK. You could also check the Port Sockets buy switching the leads over to the unused ones. Regards, James (CONman) Anderson -= VPC OffLine Reader Version 1.1.0.0 =- Registered to: James Anderson -OLR.PL v1.76- Remove | Alert Edit | Reply | Reply With Quote | Top

Table of Contents

Subject      Author      Message Date     ID      Hub Collisions    BillC       06-25-02              RE: Hub Collisions    andrewluck       06-25-02       1            RE: Hub Collisions    BillC       06-26-02       4         RE: Hub Collisions    James       06-25-02       2            RE: Hub Collisions    BillC       06-26-02       3                 RE: Hub Collisions    James       06-26-02       5                      RE: Hub Collisions    BillC       06-27-02       8                           RE: Hub Collisions    James       06-27-02       9                                RE: Hub Collisions    andrewluck       07-01-02       10                                     RE: Hub Collisions    James       07-02-02       11                                          RE: Hub Collisions    andrewluck       07-03-02       12                 RE: Hub Collisions    Ben_Chiu       06-27-02       6                      RE: Hub Collisions    BillC       06-27-02       7

Forums | Topics | Previous Topic | Next Topic