Ben,
Thanks very much for posting the "new' DC-3 Cockpit.
The addition of the overhead circuit breaker panel has really enhanced the "realism" factor when I slide.......well....when I slither into my seat. Grin.
I don't know why I put off something so simple for so long.....
To get the 'suspension' area...first picture a room with the normal 4 walls. I fit my cockpit into that room so that it faces one corner of that room.....it points directly at the "meeting" of two walls.
I purchased two "extension" poles at Home Depot....the kind that you might use to attach a sponge or a scraper to allow you to reach high places/windows on the side of your house.
I simply mounted a shelf bracket on each wall....and then extended the poles the required length so that each could fit into a shelf bracket. I mounted another shelf bracket further out from the original two.....and then suspended another pole from those two.
Then, using very light foam/cardboard from Office Depot.....black in color.....the 'roof' was formed by laying that foam sheet(S).....4 X 6 feet.... on the top of the two poles.
I then went up into our attic and retrieved the Christmas lights of last season. grin. I had remembered purchasing a 4 x 6 foot "mesh" lights that allow you to "wrap" around a porch column or to lay over your landscaping bushes for decorative lighting.
I made 150 holes in a grid pattern, using a 2 x 3 foot size.....using a 1/8 inch drill bit.......and then simply pressed each individual bulb into the hole....the cardboard/foam is about 1/4 inch thick...and the lights are very snug in those holes.
I did leave ONE hole unfilled.
That way.......I can say to my wife........."Hey....I think I have a circuit breaker out."
Grin.
Cap'n Tarmack